Website GIF

Website GIF

Sunday, 12 July 2015

GETTING IN-TUNE WITH YOUR SOUNDER SETTINGS PART 4





WAYPOINTS

The common fishing sounders and GPS units really have revolutionized the way we fish in this day of age with the humble 2D sonar charts and basic GPS navigation have come so far in the last fifty odd years. some gear is more expensive and some are cheaper, some are for larger vessels than others and some have far better detail and greater settings, but one thing we all know for sure is that fact that they have changed the way we fish in the modern day.



Companies like Lowrance are always on top of the technology thus providing anglers with the latest and greatest in fishing sounders and chartplotters. I have had some many anglers say to me, "We didn't have sounders in our day and we still caught fish'.... well that truth is factual, but there's a couple of matters to consider that surround that statement and one of them is "You can tie some monofiliament line to a stick, use a rock for a sinker and make your own hooks and still catch fish too" so why do we use a graphite rod, carbon reels and braided line if you can catch fish on common sticks and rocks. A Sounder and a GPS chartplotter is a tool, just like your rod, reel, line and lure are a tool, use them to your advantage and it's a fact that you will not only find more fish, not only hold on top of more fish and not only catch more fish, but you will learn more about those fish that you are catching. You will learn as to why they hold in that part of the water, you will learn what temperatures these fish like to live in, what kind of structure they prefer etc... and that's where your waypoints function will assist you. When you learn all these aspects of these fish you target you will also learn that these spots you end up conquering sometimes need to be documented for further trips so you can come straight back to these very locations and dominate them time and time again.




Finding fish is time consuming and frustrating at times, constantly scanning up, down and along the waterway, looking for that key structure and depth. As soon as you find some hit the waypoints button on your unit and save the location, name it whatever you like, its so easy with today's technology, one button press and the positioning is saved for later dates as well as fishing now. I also use waypoint position saving for navigational safety hazards like fallen trees, shallow water and low knot zones. Use the waypoint button for plot coursing, following depth contours and creating trails for safer navigation through hazards. This gives so much more peace of mind while out fishing and boating and leaves more time focusing on the fishing as opposed to navigating with no confidence.



You can also Manually put in the coordinates in the waypoint settings menu, maybe you have obtained some coordinates through fellow anglers, or maybe off the internet, Its still so easy to save waypoints. Chartplotter technology really has revolutionized our fishing abilities especially for gaining knowledge on sopecies habitats. How many times have you ever caught reef fish in locations that cannot be remembered just on sight alone? Marking fish locations with waypoints allows you to return back to that spot every time, There are reasons fish hold in these locations, either due to structure, depth , drop zones, it could be so many reasons and chances are, you will catch these fish one after another in that exact area. So every time you come over good sonar fish marks or get reactions from fish in that area, drop a waypoint on it, soon enough you will build a great database for future reference, Confidence comes from assurance and where some fish are not on the bite you can easily go straight to your option B waypoint that you previously saved at a later date, and thus is where routes come into play.




ROUTES 

Routes can be utilized for many things while on the water, one of them like I've noted is for safe navigation paths, but the other is for location and waypoint hopping,. If a routes is saved as the fastest option between A and B, then the same path can be navigated time and time again, from one waypoint to the other. 




When you find obstacles such as fallen trees and rocks you can mark them with a waypoint and then you can go back to create a route to safely cruise through those obstacles, its not just common sense while trying to navigate with safety as many of the obstacles are unseen as they are under the waters surface, its a sure thing with a chatpotter, 



In the summertime I do a lot of afternoon Bass trips on the river, upon my return after my surface sessions it has become completely dark, so dark on the river you cannot see what is in front of you. Now nighttime navigation should not be your preferred way of boating as it can be very dangerous. I make the use of routes that I've previously saved while it was daytime to help me navigate back to the boat ramp in the dark. In no way am i saying to you to use your chartplotter to navigate you in the dark when you cannot see. I have driven on this stretch of river for quite some time and I know its bends and obstacles even in the dark, Its just that my chartplotter routes give me more confidence to navigate on the water, I use it as a helpful tool, not as my only measure. It is always important to familiarize yourself with your system and its landmarks before even attempting to navigate it in the dark, use a big rock boulder, a bridge a bend or many other landmarks to mentally mark your surroundings as well as the use of your chartpotter and the route setting.

TRAILS

Trail markings on a chartplotter is one of the greatest tools, it allows you to view where you have been on the water. I especially find this function effective while drifting and working the banks, especially if your drift has given you great results and you nhave caught fish on that particular drift. You can then head straight back to the start of that drift line and with the use of your electric motor you can then take the same path following the trail markings on the chartpotter. 



You can set your drift trail at anytime in the trails settings, its as easy as one button on the HDS gen 3 models located on the left hand side of the home screen. When I get to my location I'm going to fish, I generally start drifting without fishing, just to monitor the sounder first thing. Find out what way I'm gonna drift, what the boat will do and looking for fish structure and arches to establish my drift lines and follow them in repeat. You will never get a perfect drift, conditions change and without motor control and trail lines it will be quite difficult to keep the same successful drift going, so I tend to use the trail function to my advantage. You can also use the trails function to see where you have been while recordeing sonar log maps for Insight genesis.

Drive trails while recording for In sight genesis.
If your a reef anglers and you drift the inshore and offshore reefs then trails will assist you on so many levels, your results will be so much better if you learn how to control your drift.As you drift over shoals of bait or fish arches and have success on those markings, you will then learn that that drift you have successful not only found the fish but you have had results on getting them on the bite, and catching them. So you can then repeat that drift until they become inactive again. Sounder and chartpotter technologies really have changed our modern fishing world and given us anglers so many more options and learning knowledge, Sounders and chartplotters don't actually catch the fish, but they do provide us with the tools to become better anglers and to familiarize ourselves as to why these places are successful in catching and also gives us the options to document that and return time afrte time again..... FIND. NAVIGATE. DOMINATE.

Thursday, 21 May 2015

GETTING IN-TUNE WITH YOUR SOUNDER SETTINGS PART 3




STRUCTURE SCAN 

Anglers are somehow just naturally gadget obsessed, but do many actually know and understand their sonar sounders? This is part 3 of my set of articles outlining all aspects of sounder settings to optimize your fishing abilities and open up a whole array of technology questions and have them explained in simple detail. Some gadgets can end up being a burden of nothing better than a purchase that was not nessesary, or a case of "Catching you with your wallet open, rather than catching any of those finned foes". But some gadgets actually end up working in a way that you could never have imagined, mainly due to the fact you have never been explained the in and outs of it in order to actually properly use it to a degree as to when it actually starts assisting you, and Structure Scan HD is actually one of those "Gadgets"


SIDESCAN

Lets take a look and break down all that is Side Scan Sonar Imaging, this function I consider to be one of my most important features of my sonar unit as a lot of my Bass fishing is done casting into the snags alongside the rivers edges and banks. Side scan capabilities allow you to have a far greater side-to-side range of imagery for marking fish and structure along side your boat as opposes to standard sonar 2 dimensional imaging. Sonars work using echo sounds, which is a form of active sonar, an electrical signal that is sent from the sounders transducer that's then converted into an acoustic pulse. Your standard  sonar broadcasts this pulse usually in a downward action to the seabed floor and then back up to the transducer that then converts it into an image on the screen in either 50kHz, 83kHz or 200 kHz. But Structure Scan HD uses a high frequency of either 455kHz or 800kHz for much larger cone angles and bigger frequencies allows the unit to return with greater detail.
Side scanning is not scanned downward, it is scanned to each side of your vessel right up into those snags and banks to return a much more vivid image of fish and structure that are likely to hold suspending fish.



Every waterway has bumps, channels, edges and other structure located that typically hold fish. Side scanning sonar will allow you the ability to approach these key structural places and scan them so now time is wasted in casting into structure or structure less bodies of water rather than blind casting. You can also determine the exact depth by moving the cursor over the marked fish or structure  making sure your lure is directly in the strike zone, this is the biggest game changer of all. Everyone loves to see surface feeding, This type of fishing is the most exhilarating style of angling any fisherman can ever do, with side scan you can view which side fish move to when the go deep so you can determine which side to cast before they re surface, yet again getting your lure into the strike zone every time. Many times I've been able to stay with active schools long after the fleet have given up returning to the surface with hookups time and time again without ever visually spotting the fish again.



Side scan sonar capabilities give you a far better and longer range as it projects well beyond the limitations of traditional standard sonar transducers. Side scan will allow you to scan both sides of the boat or in the settings you can change it to just one side of the boat. You can set your device to only scan in the shallows which will allow you to to set the range well over 100 feet to the side and still make out important detail. You can scan Weed beds and lines, sunken vessels, natural reefs, coffee rock or fallen trees, the limits are endless.



Identifying fish, I usually primarily target bass in the warmer months, on traditional sonars you will see bait marked as a red blob (Depending on your sounder settings) and this allows you to notably view them as a rather blurry image that's under your boat. You can then begin to make an educated guess based on the water temperatures and ;location of the size of the school of bait. Side scan solves most of this guesswork for you, Take some bait fish for example.... white bait usually school in congregations of around 100 to 200 individuals and look like a loose ball of white dots, but Kingfish typically appear in schools of around 10-20 and above in offshore reefs in tightly packed schools. I may not seem like  much, but to the trained eye it becomes much more obvious as to what that type of species may be.



I explain Side Scan Imaging and how it actually scans the sides of the vessel as a folded piece of paper in the middle leave the sides of the paper laying flat. The top edge of the paper is the boat, and it scans out to the sides as well as in a downward motion, allowing the area to be completed covered to your desired depth setting.



DOWN SCAN IMAGING

To easily grasp the concept of Down Scan HD Imaging, think of it as a detailed high definition digital television as opposed to the old analogue tuners (Some younger readers may not remember those days) It creates a much greater detail in images than the standard sonar image, the signal is much more intensified to create sharp, crisp and high definitive imagery on your HDS screen. Lowrance HDS Broadband units allow bottom soundings of up to 600 fathorns,



Down scan imaging has the ability to provide a greater detailed picture-like image of the bottom and structures directly below your vessel. acting exactly like the down scan version of side scanning. These picture like images displayed on the screen use a specific image software that represents the return sonar signal in the most detailed manner. The 455 or 800kHz frequencies used in Broadband Imaging gives the sharpest image of resolution where as the 455kHz frequency gives the best overall image quality and depth. As I've explained in a previous article on frequencies on this website in the past  www.thefishcure.blogspot.com.au/2015/05/getting-in-tune-with-your-sounder-part-2.html



Broadband scan not only gives a better cone of detail than a standard sonar can give, but it will generally pick up fish in areas a standard sonar usually would return an image detailed enough to show fish sitting on the edges of drop offs like Mulloway and Flathead. But standard sonar will always still have its place in modern fishing as it gives off contrast for bottom hardness and vegetation and tuned right will assist any angler when combined with both Structure Scan functions, which is when Overlay Down Scan imaging comes out to play.



OVERLAY DOWNSCAN

The exclusive technology of Overlay Down scan option allows you to combine both standard Sonar Imaging and Structure Scan HD Imaging to get the best offers from both worlds. This easily exposes fish targets from structure with fully adjustable palette options available. 



Separating fish from structure using the Overlay Down Scanning if used in the right situation can be one of the greatest tools in angling history. Many times fish have been sitting inside structure and are hardly visible as fish on the screen, this take the guess work away by allowing the structure and the fish to be viewed both in a totally different way. the fish will be scanned in 2D and the structure will be viewed as 3D making it so much easier to make that targets visible amongst the heavy dense cover.



For those of you that don't have the luxury of having a larger screen to easily run both Structure Scans and standard Sonar displays on the one screen then overlay down scan can be a great option for you. You can also adjust the transparency of the overlay in your options to suit your viewing discretion. The idea behind down scan Overlay is to better your view, example being is... If your fishing in an uncharted area with no means of whats below, your likely to see rocks and other fish holding structure a lot better on Structure Scan HD than you would on standard Broadband Sonar as it would most likely return an image that you cannot define any detail. With both imagery combined and layed over the top of each other its a much easier way of viewing suspending fish amongst easily distinguished structure. It can take a little getting used to, but try and see bottom with Structure Scan, image overlaid on the Broadband Sonar and pick out the fish on the screen with the broadband sonar image that is incorporated over the top. 



Saturday, 2 May 2015

GETTING IN-TUNE WITH YOUR SOUNDER PART 2

TRANSDUCERS

This article is to talk about Transducers and all that makes them work, including frequency settings on sonar and structure scan, cone angles on the transducer beams and the all new latest Chirp.
To understand how a transducer works firstly is paramount, then you can start to understand how cone angles work to determine what frequency you should be running for your style of fishing.

CONE ANGLES

To understand how a transducer works I wanna firstly explain how a transducer transmits a sound wave beam known as a "Cone Angle". this is like a V shaped fan that shoots sound waves to targets and returns back to the transducer like a ricochet. The reflected signal is received by the transducer and is sent to the sounder unit to be processed into a more likely recognizable object on the screen. The signal that is sent out from the transducer varies in frequency, this frequency is set by you in the units settings. The most common sonar frequency settings are 50 kHz, 83 kHz and 200 kHz and more high definition Structure Scan frequencies can run larger amounts like 455 kHz and 800 kHz, but ill go into that in more detail below. 

Transducer beaming a cone angle


A cone angle or beam angle determines the coverage of an area under your boat from the transducer, the larger/wider the cone angle is the greater the area of coverage. Cone angles vary in difference between each manufacturer, but generally a 200 kHz transducer will have somewhere in between a 12-20 degree cone angle, and a 50 kHz transducer will have anywhere between a 30-40 degree  cone angle. 

Explaining how different frequencies have different cone angles


This may be hard to process so try and think of the cone angle as an adjustable torch light, when the light is expanded out it illuminates a wider area than what it would if it was a narrower light beam when adjusted. But when the light source is wider may light up a bigger area but the area isn't as defined or as lightened as it would if the light beam was narrowed. So what I'm trying to explain is, If the wider the cone angle is selected for example the 83 kHz frequency the more area it will cover and identify fish and structure. But it wont necessarily be as clear. But if the cone angle was say 200 kHz which is a larger beam it wont cover as much area but the sonar beams will be more accurate in returning the image back to the transducer therefore give a more detailed image on your sonar chart screen. I will cover frequency selections in moire detail below.

FREQUENCIES

SONAR FREQUENCIES 200, 83 and 50 kHz 

Most sonar units that are sold on the market for general sonar fishing operate a frequency of 200 kHz, some models use 50 kHz and 83 kHz, and some have the capabilities to have a split screen and have 200 kHz on one screen and say 83 or 50 kHz on the other screen so you have a wider cone angle and a narrower angle on the other side to cover both aspects of water coverage. As i mentioned your typical higher frequenies like a 200 kHz setting will excel in showing minute details of the underwater world, but will have a smaller area it will cover as opposed to the 83 kHz or 50 kHz frequency, it will have a larger area covered but in less detail.

Larger cone angles have less detail, Smaller cone angles have more detail
The menu is in the top right corner of HDS models to change frequencies


In shallower water usually I fish for Bass in the summer months in water up to 20 meteres and generally set my frequency on 200 kHz as I'm after a smaller area of coverage cause the water depths are shallower and I'm after more detail cause im generally looking for that structure that the Bass hide in. If I was fishing a deeper style of fishing like reefs I would set my frequency cone angle to 83 kHz as im after that larger cone to cover more area of the waters depths as the 83 kHz frequency setting (or 50 kHz if you dont have a transducer with 50kHz) has a greater depth penetration for deeper water applications but will return less definition in image quality on the sonar screen.

Display of how fish look as they enter and leave the cone angle

STRUCTURE SCAN FREQUENCIES 455 kHz and 800 kHz

A Structure Scan transducer frequency works nearly exactly the same as a standard sonar frequency using con angkles. But a side scan sends the waves outwards and down which is explained in a section of these articles when Structure Scan is explained in detail. so basically a frequency of 455 kHz cone angle will be a larger cone and cover a greater area of  underwater, but will return back to the sonar chart in less definition. An 800 kHz frequency will send out a smaller cone angle covering less area of coverage but will give a more detailed image displayed on screen.

A diagram explaining exactly how beam cone angles on a transducer work
The menu is in the top right corner of HDS models to change frequencies on Structure Scan


Structure Scan frequencies are far bigger cone angles than the standard sonar imagery that was explained aboive. it is created to show 3D images of fish suspending or structure laying in the water column. These frequencies when used with side scanning cause make spotting fish or finding structure of up to 600 feet (183 metres) either side of the boat. Makes it ideal for those anglers that find it c=ritical in fisding either structure on the banks edge or below the boat in order to find fish hiding and habitats.

This is the top and front view of different cone angles for different frequencies

Thursday, 30 April 2015

GETTING IN-TUNE WITH YOUR SOUNDER PART 1





Firstly....  the term fish finders is a commonly used name for an electronic fishing device. I tend to steer away from using the term "Fish Finder" It is so much more than just a fish finder. A "Depth Sounder" is used to determine the bottom depth, structure, water temperature, rock location, bottom hardness etc... All of this comes into plan when "Finding Fish" especially with the style of wild Bass fishing I do where finding the fish isn't as essential as knowing exactly where structure is located under the water as well as the depth and temperature of the water.

There is so much to learn when it comes to understanding how a sounder works and its many settings that will give you the optimum usage, Most anglers get overwhelmed with all the settings available,
The way I tend to look at is, you spend a whole bunch of money to assist you to fish better, fisnd fish and structure, you at least owe it to yourself to get the most out of your sounder.  Yes it can be a little daunting for a beginner, and even the more intermediate users can have trouble if it's not explained properly and broken down to simplicity.



This article will be a series of posts breaking down all the common settings of Lowrance Sounders. I will explain all those settings that many anglers have trouble understanding what they are and how they can be utilised to give your fishing a better chance through the use of your unit. Settings include Sensitivity and Ping Speeds all the way through to Chirp and Overlaying Downscan to a easier, more understanding format so you can now have the full use of your sounder at its best quality for the style of fishing you do.

 SENSITIVITY/CONTRAST

Sensitivity, think of it as a metaphor, the metaphor I'll refer to is a hearing aid. If you turn up a hearing aid you'll be able to hear better but if you turn it up to far the noise will be to loud and you wont be able to determine what is said. The reason I use a hearing aid as my metaphor is, sensitivity is your hearing aid it adjusts the way you get waves back to the unit. The sensitivity on a sounder needs to be above 50 percent to view anything of recognition, so when you turn it up above 50% you'll start to realize that the images on the screen get clearer and clearer, but there is a such thing as too much sensitivity. If you turn your sensitivity up to much it will start to blur the images again and you wont get a clear view of the bottom, structure and fish arches.

Screenshot with Sensitivity too low

There are a few pointers you can follow, but generally it is a matter of experimenting different sensitivity settings in order to get your right image quality. Shallower water for instance will not have the same sensitivity as deeper water columns. For instance, if you are fishing in water 20 metres in depth you would not set the sensitivity at 95%, this is cause the image on the sounder screen will clutter. Basically it will make all objects on the screen form together and you will not get an accurate description of what is located below your boat. So start by easing down the sensitivity by small increments of around 3-4% at a time, soon you will begin to realize that the screen is beginning to clear up from the bottom, keep backing off the sensitivity until your bottom of the screen is completely visible and clutter free and you can begin to make out structure and fish arches. This will mean that even the smallest of bait fish will be visable as they begin to move into the transducer cone angle. They will be visible as either singular fish or schools of bait. Most of the time you will be left with a heap of clutter across the top of the screen, if you are fishing off the bottom or roughly as closer to the bottom then I would suggest putting up with the clutter on the top half of the screen or if you need the whole water column I would suggest clearing up the top half of the screen using your surface clarity function in which I cover on how to use this setting below.
As you begin to fish deeper depths of water repeat the process for the optimum setting for that depth of water column.

You will find that if you make your sensitivity higher than generally you may have to back off your contrast to give the image some depth and shadows, It really is a trial and error game as I mentioned. The more you experiment with these settings, the more it will become clear for you and you'll wonder why you ever put it on the auto setting, Also take note that sometimes if your constantly changing depths in your drift it can be easier to set it to auto so you actually spend more time fishing and less time adjusting the screen.
This may take a few times to work out but you will generally begin to get the hang of how sensitivity and contrast settings work.

SURFACE CLARITY

Now if your screen is clear from the bottom half of the screen upwards and your top half of the screen is cluttered and you generally want to fish the top half of the water column for pelagic's or you need the whole depth of the water column, then I would suggest to have your surface clarity option set to high. This will begin to clear up the clutter in the top part of the screen giving you a clearer view of whats in the higher parts of the column. 

Screenshot of surface clutter
Surface clarity settings also helps clear up the clutter closer to the waters surface caused form boat wake and wave actions. Bilge pumps and engine vibration can also give you clutter on the surface and interfere with image quality. If you are experiencing these problems then I would suggest turning your surface clarity to a higher setting, you'll end up getting a much clearer image on your screen to a point that if you are fishing vertically you will see your lure as you drop it passing through the transducers cone angle. This is really fun, you now have a fully functioning sounder that is set up to now play a game of cat and mouse chasing to literally get the fish to react to your lure on screen and work out a tactic that gets them to bite.

Surface clutter cleared using high surface clarity

COLOUR PALETTE

When I choose a colour palate for my styles of fishing I generally pick a palette that has the highest concentration of colours. The options available to us through colour palette selections are more of a personal preference than a scientific reasoning, but one thing I will mention is if you change your colour palette you need to then pay attention and adjust your sensitivity and contrast for that particular palette for the best and clearest image quality on screen. 

Colour palette selection 13
A big variable factor to remember is personal preference is often just an anglers own makeup. Some of us like me were not blessed with good eyesight and thus is the reason some shades and colours are better for an angler like myself but may not be better for the next angler. The more colours that are displayed in my opinion, the more detail you will be likely to see. Different colours displayed represent different shades and depths of objects with the right tuned settings. I find myself using, (but not restricted to) the colour palette 13 with a brown bottom due to its simplicity and ease of viewing.

PING SPEED /NOISE REJECTION

When we cruise from hole to hole or trolling at higher speeds than normal I would recommend turning the "Ping Speed' in settings up.that makes the transducer distribute more sound waves to echo from its target back to the transducer. When travelling at higher speeds, sometimes bait fish or a small bait school can appear on the screen as a dot when travelling at say 30-km/h. When the ping speed is turned up these targets would give off a more solid return sound waves back to the unit and return a more definitive image that makes the appearance on the sonar screen more recognizable.

Interference caused from a live well


But also changing the ping speed also changes the scroll rate of the sonar chart. Changes in the ping speed should only be made to provide the best possible image on the chart sonar screen at the time of your application. In other words don't turn your ping speed up unless it actually helps you get a better visible image of the sonar. To get the best possible use out of your sonar chart, the details should be recognizable. It is sometimes necessary to try different ping speed settings over some known targets and stretches of waterways in which you are completely familiar with to better understand how some ping speed changes can effect your sonar chart.

Turning Ping Speed up


Another known issue that may rise with image interference is sometimes some boats can give off what is known as "Noise" which can be a series of clutters and interference in image quality given off from your boats engine idle or passing boats. In some cases other electronics such as live wells and bait tanks can also give off noise on the sounder screen. You can do one of two things: Turn the ping speed down or you can turn your sonar chart noise rejection on. By doing this in most cases illuminates or helps reduce noise and interference cause from other sources like an electric motor and or live wells.


Saturday, 11 April 2015

MAKING YOUR OWN MAPS WITH INSIGHT GENESIS

MAPS WITHOUT LIMITS



Navico has created an online social mapping system called Insight genesis that allows you to record your own maps with contour lines, vegetation and bottom hardness indicated by various colour charts.

Its quite an easy system to use, firstly jump onto the Insight Genesis at:

website http://www.gofreemarine.com/insight-genesis/





Sign up to make a profile with Insight Genesis, this is the software that creates the custom maps after you have uploaded your recorded Sonar logs.

Many anglers have asked me how to record the sonar log, so I made a quick video while out on the water whilst I was recording sonar logs for Lowrance to make it easy



Once your sonar log is recording start doing laps up and down the adjacent much like a grid (Like in the screenshot below) activate the trails in your chart settings so you cab track your progress as you record your log.



Once you have recorded your sonar log, upload your trip using the Insight Genesis desktop tool you downloaded when you signed up to your profile. Once its uploaded you will recieve an email notifying you as soon as your map is created so you can view it.



Your trails will also show up indicating your routes while sonar logging and if you click anywhere on the red trails, it will show up the sonar that was recorded to your right right of the screen at the time of recording your log.




After the map has been created you can then view the contours and features of the maps. The bottom hardness is measured by the colour red, Orange through to a light brown transparency. The darker the Red is the harder the bottom is, as it goes right through the colour contrasts all the way to light brown transparent being the softer bottom.


Contour lines show in the custom maps and the colour palette for depth is shades and contrasts of Blue. Its the same concept as the bottom hardness colour palette. The darker the blue the deeper the water, the lighter blue is the shallow waters.


I will go more into detail with a later blog entry focusing on how to use these maps for your advantage while fishing to improve skills and tracking fish locations, drop offs and holes.